Valubuild Manufactured Panel Homes Corporation is dedicated to providing the highest quality in panelized home kits on the market.

Each of our standard manufactured home kits comes with a full set of shop drawings which you will need in order to build your manufactured dry-in shell. The shop drawing package includes floor plans, framing plans, wall sections, header load tables, sealed manufactured truss design packets, panel count and layout, and any other drawings necessary for manufacturing your home. You will receive Four (4) sets of drawings plotted on 11"x17" bright white bond paper at 1/8" = 1'-0" scale; One (1) for your builder, two (2) for the building department, and one (1) for your own records. The standard package we provide will be all you will need to build your manufactured home.

The following is a standard list of manufactured drawings we include in our packages and their contents. Some designs may require more than the standard and some may require less; every home is different and we provide to suit specific needs.

Panelized Housing Floor Plans

- Space layout, dimension, and type
- Door and window sizes and locations

Valubuild Manufactured Homes Foundation Plans

- Structural member specification and location for house
- Typical foundation wall section
- Diagonal dimension(s)

Roof Framing Housing Plans

- Truss specification, spacing, and type
- Manufacture Sealed truss design package (Mitek®)
- Overhang
- Slope

Floor Framing Plan (if applicable)

- Joist specification, spacing, and type
- Manufacturer's specifications (Weyerhaeuser®)

Valubuild Manufactured Homes Panel Layout

- Panel dimensions and location
- Header specifications
- Window and door openings
- 3d view of panel layout (axonometric / isometric)

Typical Wall Section

- Specifications of wall construction
- Foundation type
- Insulation type with R rating

Miscellaneous Notes and Details

- General notes
- Miscellaneous framing details

Stamped Architectural Drawings

If our standard shop drawings are not sufficient to obtain a building permit and manufacture your home then for an additional fee we can also provide a complete set of stamped architectural drawings if your local code requires the seal of a professional. Such areas include the earthquake prone regions of California and the Pacific Coast, hurricane risk areas of Florida as well as both the Gulf and Carolina Coasts. Parts of New York, New Jersey, Nevada, Illinois and Virginia may also require review by a professional. If you are building in such an area, then the engineer will provide additional documentation such as energy calculations and any other relative information the building department specifies. We guarantee that the drawings we provide will pass code no matter the location. The drawing package includes site plan, floor plans, elevations, framing plans, electrical and piping layouts, wall sections, header load tables, manufacturers sealed truss design packets, panel count and layout, and any other drawings necessary for manufacturing your home. You will receive Four (4) sets of drawings plotted on 24"x36" bright white bond paper at ¼" = 1'-0" scale; One (1) for your builder, two (2) for the manufacture building department, and one (1) for your own records.

*Remember, our standard shop drawings are not full architectural drawings and do not come with a professional seal. We have business partnerships with engineers licensed in states all over the country, and your manufacture building department may not give you a permit without professional approval. If you need these services, inform us immediately so that we may begin processing your information. There also may be additional information that you will have to provide, such as; a site survey, soil test, and zoning ordinances. In some jurisdictions only an architects' seal is acceptable (In this case if our architects are not registered in your state, your plans will have to be created and stamped locally.)

The following is a standard list of drawings and their contents that we include in our drawings packages. Some designs may require more than the standard and some may require less; every home is different and we provide to suit specific needs.

Valubuild Manufactured Homes Site Plan

- Site location and address
- Building location on site
- Setback and building lines
- Power, water and sewer
- Site dimensions and elevations

Floor Plans

- Space layout, dimension, and type
- Door and window schedules with sizes and/or type
- Code related notes

Manufactured Homes Foundation Plan

- Structural member specification and location for house and/or deck(s)
- Typical foundation wall section
- Diagonal dimension(s)

Elevations

- Roof material
- Siding
- Window and door locations
- Decks with steps
- Shifts in grade

Roof Framing Plan

- Truss specification, spacing, and type
- Manufactured Sealed truss design package (Mitek®)
- Overhang
- Slope
- Code related notes

Floor Framing Plan(if applicable)/Shearwall Plan

- Joist specification, spacing, and type
- Code related notes
- Hold down and shear wall schedules
- Header specifications

Electrical Layout

- Location and type of switches, outlets, etc. and systems
- Wiring map

Piping Layout

- Path of pipes through structure

Panel Layout

- Panel dimensions and location
- Window and door openings
- 3d view of panel layout (axonometric / isometric)

Manufactured Homes Typical Wall Section

- Specifications of wall construction
- Foundation type and reinforcing
- Insulation type with R rating

Miscellaneous Notes and Details

- Stairway section and details
- General notes
- Floor plan notes
- Energy notes
- Roof notes
- Miscellaneous framing details

If you have any questions regarding the drawings we provide, or if you would like to inquire about fees for engineering or manufacturing, please contact us at 1-800-553-5907